| KSB CHTA、 CHTB CHTC 、CHTD 、YNK YNKN MBH 、NLT |
| KSB SEZ SNZ、HGA.HGB.HGC、PHZ、PNT.PHT、OMEGA RDL |
| AMAMIX AMAPROP、 MF.MN、AMACAN S、AMACAN P、LC |
| 德國KSB凱士比PHZ泵 KSB PHZ |
| KSB PHZ Type of bearing Rolling element and plain bearings |
| Casing partition Radially split |
| Drive frequency 50 Hz /60 Hz |
| Type of drive Electric motor |
| Drive voltage Low voltage, high voltage |
| No. of impeller entries Single entry |
| Type of installation Long-coupled |
| Type of coupling Gear;Direct |
| KSB PHZ Type of lubrication Oil / Pressurized oil lubrication |
| Max. permissible fluid temperature 80 °C |
| Maximum rated pressure (discharge) PN 6; PN 9 |
| Pump set location Dry installed;Wet well |
| Suction characteristics Non-priming |
| Type of casing Tubular casing |
| Type of impeller Mixed flow impeller;Propeller |
| Type of connection Flange |
| UNSPSC classification 4015150300 |
| eClass assignment 36410000;36410106;36410100 |
| Maximum head 25,00&nb, sp;m |
| Minimum head 12,00 m |
| Installation position Vertical |
| Shaft seal type Mechanical seal;Gland packing |
| Main applications Energy |
| Casing material Duplex steel;Chrome nickel steel;Carbon steel |
| Type of installation Stationary |
| Maximum flow rate 65.000 m³/h |
| Minimum flow rate 5.000 m³/h |
| Maximum speed of rotation 990 1/min KSB PHZ |
| 德國KSB凱士比PNW泵 KSB PNW |
| Type of bearing Plain bearings |
| KSB PNW Casing partition Radially split |
| Drive frequency 50 Hz /60 Hz |
| Type of drive Electric motor |
| Drive voltage Low voltage |
| No. of impeller entries Single entry |
| Type of installation Long-coupled |
| Type of coupling Direct |
| Type of lubrication Oil / Product lubrication |
| Max. permissible fluid temperature 60 °C |
| Maximum rated pressure (discharge) PN 10 |
| Pump set location Wet well |
| Suction characteristics Non-priming |
| Type of casing Tubular casing |
| Type of impeller Axial;Propeller |
| Type of connection Flange |
| eClass assignment 36410000;36410106;36410100 |
| Free passage 170 mm |
| Maximum head 10,00 m |
| Minimum head 0,50 m |
| Installation position Vertical |
| Shaft seal type Gland packing |
| Main applications Waste water / sewage;Water |
| Casing material Ni-Resist;Chrome nickel steel;Carbon steel |
| Maximum drive rating 320 kW |
| Type of installation Stationary |
| Maximum flow rate 9.000 m³/h |
| Minimum flow rate 290 m³/h |
| Maximum speed of rotation 1.500 1/min KSB PNW |
| 德國KSB凱士比SEZT泵 KSB SEZT |
| KSB SEZT Type of bearing Plain bearings |
| Casing partition Radially split |
| Drive frequency 50 Hz /60 Hz |
| Type of drive Electric motor |
| Drive voltage Low voltage, high voltage |
| Type of installation Long-coupled |
| Type of coupling Direct |
| KSB SEZT Type of lubrication Oil / Pressurized oil lubrication |
| Max. permissible fluid temperature 45 °C |
| Nozzle position Side-side |
| Maximum rated pressure (discharge) PN 6; PN 10; PN 16 |
| Pump set location Wet well |
| Suction characteristics Non-priming |
| Type of casing Tubular casing |
| Type of impeller Open |
| Type of connection Flange |
| eClass assignment 36410106;36410101;36410000 |
| Maximum head 110,00 m |
| Minimum head 7,00 m |
| Installation position Vertical |
| Shaft seal type Mechanical seal;Gland packing |
| Main applications Water |
| Casing material Duplex steel;Cast duplex steel |
| Maximum discharge-side pressure 16 bar |
| Maximum drive rating 7.500 kW |
| Type of installation Stationary |
| Maximum flow rate 20.000 m³/h |
| Minimum flow rate 1.200 m³/h |
| Maximum speed of rotation 990 1/min KSB SEZT |
| KSB CHTA、 CHTB CHTC 、CHTD 、YNK YNKN MBH 、NLT |
| KSB SEZ SNZ、HGA.HGB.HGC、PHZ、PNT.PHT、OMEGA RDL |
| KSB NW、ISKM、ZL、HL、RPK |
