新闻详情
插销螺套的安装与拆卸
日期：2026-06-14 22:11
浏览次数：1977
摘要：插销螺套的安装与拆卸
插销螺套的安装与拆卸（Installation and Removal）
插销螺套的安装（Installation）
Drill out old threads with a standard drill. Note: Drill is oversize — see charts for proper dimensions. Chamfer the hole with a standard countersink (82°-100°).
Tap new threads with a standard tap. See charts for proper size and depth.
Screw in the insert until slightly below surface.
Drive keys down with several hammer taps on the proper insta...
插销螺套的安装与拆卸
插销螺套的安装与拆卸（Installation and Removal）
Tap new threads with a standard tap. See charts for proper size and depth.
Screw in the insert until slightly below surface.
Drive keys down with several hammer taps on the proper installation tool.
插销螺套的拆卸（ Removal）
Drill out material between keys and internal thread with standard drill to specified depth (refer to charts for proper dimensions).
Deflect keys inward and break off.
Remove insert using an E-Z OUT or similar type tool.
插销螺套的安装与拆卸（Installation and Removal）
插销螺套的安装（Installation）
Drill out old threads with a standard drill. Note: Drill is oversize — see charts for proper dimensions. Chamfer the hole with a standard countersink (82°-100°).Tap new threads with a standard tap. See charts for proper size and depth.
Screw in the insert until slightly below surface.
Drive keys down with several hammer taps on the proper installation tool.
插销螺套的拆卸（ Removal）
Drill out material between keys and internal thread with standard drill to specified depth (refer to charts for proper dimensions).
Deflect keys inward and break off.
Remove insert using an E-Z OUT or similar type tool.
Same size replacement insert may be installed in the original hole.
