如果您对该产品感兴趣的话,可以
产品名称:
费斯托FESTO伺服定位控制器接口器
产品型号:
SPC-AIF-INC
产品展商:
FESTO
关注指数:728
产品文档:
无相关文档
简单介绍
费斯托FESTO伺服定位控制器接口器
接口器产品代号: 537320伺服
定位控制器接口器 用于连接磁性增量式位移传感器
费斯托FESTO伺服定位控制器接口器
的详细介绍
费斯托FESTO伺服定位控制器接口器
产品代号: 537320
伺服定位控制器接口器 用于连接磁性增量式位移传感器
比例阀的电流消耗 1,1 A
伺服定位控制户接口的电流消耗典型值 60 mA
CE 符号 (参见符合的标准) 根据 EU-EMV 指导原则
持续抗冲击强度，符合 DIN/IEC 68 标准, 第2 - 82部分 按照严格等级 2 进行测试
2 Seal/separator plate
3 4/8-valve basic block with
setting options for fieldbus
4 Expansion block/energy supply
6 Right-hand end plate
7 Push-in fittings, right-hand end
8 Blanking plugs
9 Push-in fittings, working lines
The collected exhaust air from the
pilot solenoid coils of the valves is
drawn off via the pressure relieving
hole (venting hole) on the rear side.
If you have included fittings with
your order, the pressure relieving
hole is also equipped with a QS
1 Mounting from above or below
2 Sub-base for individual valve
3 Individual electrical connection
4 Push-in fitting (working lines)
5 Push-in fitting for pilot air supply
and exhaust, venting hole
6 Push-in fitting for compressed air
supply and exhaust
7 Valve
8 LED display
9 Manual override (per solenoid
coil, non-detenting)
All valves on the CDVI valve terminal
can be assembled on the individual
sub-base CDSV. The individual subbase
CDSV has a connection for external
pilot air supply, is pre-assembled
with valve and 10 m PVC cable and is
fully inspected before shipment.
Assembled push-in fittings included
A Clean Design mounting set comprising
two screws (18 mm and 40 mm)
and two stainless steel blanking plugs
permits mounting from above or
The collected exhaust air from
pilot solenoid coils of the valves
drawn off via the pressure relieving
hole (venting hole) on the rear
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
