IFM光电开关，爱福门激光测距传感器，O1D155
接插件
可见激光，激光等级1
4 位数字数码管显示
测量范围 0.3...6 m (参照白纸200 x 200 mm, 90 %反射)
背景消隐 > 6...100 m
电气数据
电气设计 DC PNP
工作电压 [V] 18...30 DC
电流损耗 [mA] < 150
寿命 [h] 50000
光线种类 红光 650 nm
防护等级 III
反相保护 是
输出
输出功能 OUT1: 常开/常闭可选
OUT2: 常开/常闭可选或模拟(4...20 mA / 0...10 V, 可设定量程)
电流负载 [mA] 2 x 200
短路保护 脉冲
过载保护 是
模拟量输出
电流输出 [mA] 4...20; 根据标准IEC 61131-2
- 负载值 [Ω] 250
电压输出 [V] 0...10; 根据标准IEC 61131-2
- 小的负载 [Ω] 5000
监控范围
背景消隐 > 6...100 m
光斑直径 [mm] < 8 x 8 ( 检测距离 6 m )
测量/设定范围
测量范围 [m] 0.3...6 (参照白纸200 x 200 mm, 90 %反射)
测量频率 [Hz] 1...33
环境条件
环境温度 [°C] -10...60
外壳防护等级 IP 67
机械技术数据
外壳材料 外壳: 模压铸锌; 窗口: 玻璃; LED窗口: 聚碳酸酯
显示器/操作件
显示 开关状态 2 x LED 黄色
运行 LED 绿色
距离, 编程 4 位数字数码管显示
电气连接
接口 M12接插件
注释 激光
激光等级1
IEC 60825-1 : 2007
除了偏差外，符合21 CFR 1040.10标准
参数 设定范围 出厂设定
Uni mm, m, inch mm
OU1 Hno, Hnc, Fno, Fnc Hno
SP1 300...5999 1000
nSP1 300...5999 800
FSP1 300...5999 1200
OU2 Hno, Hnc, Fno, Fnc, I, U I
SP2 300...5999 2000
nSP2 300...5999 1800
FSP2 300...5999 2200
ASP 0...5999 0
AEP 0...5999 5999
rATE [Hz] 1...33 15
dS1 0...0.1...5 0
dr1 0...0.1...5 0
dS2 0...0.1...5 0
dr2 0...0.1...5 0
dAP 0...0.1...5 0
dIS d1..3; rd1...3; OFF d3
重复精度/**度
测量频率 15 Hz 测量值的重复精度 **度
白色(90 %反射) 灰色(18 %反射) 白色(90 %反射) 灰色(18 %反射)
300...1000 mm ± 11 mm ± 13 mm ± 31 mm ± 33 mm
1000...2000 mm ± 28 mm ± 30 mm ± 48 mm ± 50 mm
2000...3000 mm ± 50 mm ± 50 mm ± 70 mm ± 70 mm
3000...4000 mm ± 85 mm ± 85 mm ± 105 mm ± 105 mm
4000...5000 mm ± 105 mm -- ± 125 mm --
5000...6000 mm ± 145 mm -- ± 165 mm --
重复精度/**度
测量频率 1 Hz 测量值的重复精度 **度
白色(90 %反射) 灰色(18 %反射) 白色(90 %反射) 灰色(18 %反射)
300...1000 mm ± 8 mm ± 10 mm ± 28 mm ± 30 mm
1000...2000 mm ± 25 mm ± 25 mm ± 45 mm ± 45 mm
2000...3000 mm ± 38 mm ± 38 mm ± 58 mm ± 58 mm
3000...4000 mm ± 70 mm ± 70 mm ± 90 mm ± 90 mm
4000...5000 mm ± 100 mm -- ± 120 mm --
5000...6000 mm ± 100 mm -- ± 120 mm --
黑色的检测距离(6 %反射) <= 2500 mm
数值用于
- 稳定的环境条件: 23 °C / 960 hPa
- 目标物外来光线的值: 100 klx
- 小的启动时间(分钟): 10
IFM光电开关，爱福门激光测距传感器，O1D155
2 Safety instructions
• Please read this document prior to set-up of the unit. Ensure that the product is
suitable for your application without any restrictions.
• Improper or non-intended use may lead to malfunctions of the unit or to unwanted
effects in your application. That is why installation, electrical connection,
set-up, operation and maintenance of the unit must only be carried out by
qualified personnel authorised by the machine operator.
• In case of malfunction of the unit please contact the manufacturer. If the unit is
tampered with and/or modified, any liability and warranty is excluded.
According to the cULus approval
Caution - Use of controls or adjustments or procedures other than those specified
herein may result in hazardous radiation exposure.
3 Functions and features
The unit is used as an optical distance sensor.
3.1 Applications
• The optical distance sensor measures distances between 0.3 and 6 m.
• It has a background suppression at > 6...100 m.
• The measured value is shown in a 10-segment display.
• According to the set output functions 2 output signals can be generated.
The distance between the sensor and the background must be limited
to max. 100 m by the customer. Otherwise the measured value may be
ambiguous. → 5.1 Installation conditions
4 Functions
4.1 Output function hysteresis
The hysteresis keeps the switching state of the output stable if the measured
value varies about the sensing range. Both outputs (OUT1 and OUT2) can be set
as hysteresis function. → 9.2.4 Hysteresis function
4.2 Output function window
The window function enables the monitoring of a defined acceptable range. Both
outputs (OUT1 and OUT2) can be set as window function.
→ 9.2.6 Window function
4.3 Analogue output function
The sensor can also output an analogue signal on output 2 (OUT2) which is
proportional to the distance. → 9.2.11 Scaling of the measuring range (analogue output).
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
