如果您对该产品感兴趣的话,可以
产品名称:
进口原装倍加福继电器模块,P+F继电器模块
产品型号:
-
产品展商:
PEPPERL+FUCHS
关注指数:776
产品文档:
无相关文档
简单介绍
进口原装倍加福继电器模块,P+F继电器模块
LED yellow: status channel 1
环境温度 -20 ... 60 °C (-4 ... 140 °F)
储存温度 -25 ... 85 °C (-13 ... 185 °F)
相对湿度 95 % non-condensing
进口原装倍加福继电器模块,P+F继电器模块
的详细介绍
进口原装倍加福继电器模块,P+F继电器模块
mechanical switches: see connection diagram
NAMUR proximity switches: no replacement network required
switching points:
- short circuit: typical < 360 Ω, certain < 100 Ω
Line fault detection (LFD)
Permanently self-monitoring
连接器 backplane bus
额定电压 12 V DC , only in connection with the power supplies FB92
连接器 backplane bus
接口 manufacturer-specific bus to standard com unit
匹配传感器 mechanical contacts, NAMUR proximity switches, 2-wire initiators
连接器 terminals 1+, 2-; 4+, 5-
额定值 符合 EN 60947-5-6 (NAMUR)
开关点/开关迟滞 1.2 ... 2.1 mA / ± 0.2 mA
线路故障检测 option: On/Off, for each channel
- open circuit: typical < 0.35 mA, certain < 0.05 mA
电压 8.2 V , typical
Indicators/settings
LED指示灯 LED green: supply
LED red: line fault, channel 1
继电器输出模块双通道，4通道或8通道模块，
用于驱动阀门，电磁阀，光学和声控报警系统
Dry contact or NAMUR inputs
Galvanic isolation between channels and the bus
Installation in suitable enclosures in Zone 1 or Zone 21
Positive or negative logic selectable
Simulation mode for service operations (forcing)
抗冲击 shock type I, shock duration 11 ms,
shock amplitude 50 m/s2, number of shock directions 6,
number of shocks per direction 100
抗振动 frequency range 5 ... 500 Hz,
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
