使用注意美国进口品牌世格2位2通电磁阀[产品打印页面]

使用注意美国进口品牌世格2位2通电磁阀
上海乾拓贸易有限公司
联系人：杨江玲
企业QQ：2880626083
手 机：（微信）
电 话：
邮箱；@163.com
地址：上海市嘉定区江桥嘉涌路6号楼713室
特性：
Solenoid valves satisfy all relevant EC directives
口径：1/4,操作压差：0-50公斤，
Valve operation is not affected by mounting position
介质温度：-20℃～+90℃，阀体材质：黄铜，G螺纹，
Valves do not require a minimum operating
2通 ，常闭，直动式，用于高压流体，
 pressure and have a high operating pressure as indicated
技术参数：
kPa] Maximum viscosity 65 cSt (mm2/s) Response times 5 - 25 ms
Differential pressure See "SPECIFICATIONS"  [1 bar =100
fluids (✷) temperature ranges (TS) sealings (✷) -20 to +90°C
-20 to +40°C air, inert gas, water, oil NBR (nitrile / buna-n) UR (cast urethane)
voltages DC (=): 24V (Other voltages
Coil insulation class F Connector Spade plug (Pg 11P) Connector
specification ISO 4400 Electrical safety IEC 335 Standard
and 60 Hz on request) AC (~): 24V - 115V - 230V / 50 Hz
简介：
Mounting brackets
Compliance with "UL" and "CSA" standards
Plug with visual indication and with peak voltage suppression or with cable length of 2m (see section
Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE-10
Low power execution, see X012 catalogue
Valves can also be supplied with FPM (fluorelastomer / viton),
EPDM (ethylene-propylene), CR (chloroprene / neoprene)
and PTFE (teflon) sealings and discs. Use the appropriate optional suffix letter for identification
Manual operator
Explosionproof and watertight enclosures according to "NEMA" standards (see section 10)
Explosionproof enclosures for hazardous locations according to "CENELEC" and national standards (see section 10)

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!