MRHQ15D-180S-N-F9NL_原装日本SMC气缸[产品打印页面]

MRHQ15D-180S-N-F9NL_原装日本SMC气缸
 Absolute filtration accuracy: 0.2, 0.4 レm
 Water, alkali, or alcohol bases
Standard Element Selection Guide
Specifications: Select desired temperature
conditions and filtration accuracy from the
"Standard Element Selection Guide" on the
b To extract the element from the case, rotate
the case counterclockwise about 20
degrees until it stops, then lower it by
about 40 mm and remove it from the cover.
端锁型(未改款) CBA2  单杆双作用
气液型气缸(未改款) CA2□H  单杆双作用
CA2W□H  双杆双作用
特长 方形端盖、采用拉杆型标准，故重量比CA1系列减轻15%。

带磁性开关(CDA2系列：CDA2、CDA2W、
CDA2K、CDA2KW、CDA2□Q、CDBA2、CDA2□H、CDA2W□H)
c Align the indentations of the case with the
projections of the cover, lift the case upward
by about 10 mm and rotate it clockwise
vMount it in such a way that the entire flanged
perimeter of the cover and case are
held by the retainer of the V-band.
bSet the stopper on the retainer while holding
down the V-band outside perimeter,
※气液型只有φ125、φ140、φ160。  形式 系列/CAD 动作方式 缸径 (mm)
低摩擦形 CS1□Q  单杆双作用 125,140,160
特长 方形端盖，大直径拉杆型气缸。
带磁性开关(CDS1系列：CDS1、CDS1W、CDS1□Q)

and then tighten the wing bolt to the prescribed
mWhen air release is completed, tighten the
l250 elements are used,
do not discard the intermediate holder
and lower element holder attached under
the element, since they are reused.
n Clean the inside of the case, gaskets, seals,
holders, plugs, etc., with a pure fluid or solvent.
Verify the recommended flow rate of the selected
element with the "Standard Element
Find a value for the formula, Necessary flow
rate ± Recommended flow rate, rounding up
to the nearest whole number. The value obtained
is the number of necessary elements
Select a housing type to hold the elements

MRHQ15D-180S-N-F9NL_原装日本SMC气缸

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!