产品[
SY5120-5DZ-C6F-Q，日本SMC电磁阀选型[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
SY5120-5DZ-C6F-Q，日本SMC电磁阀选型
产品型号:
-
产品展商:
SMC
关注指数:417
产品文档:
无相关文档
简单介绍
SY5120-5DZ-C6F-Q，日本SMC电磁阀选型
Electrical entry
Applicable cable
Bleed air flow (Port P2)
Installation
0.05 to 0.66 MPa (Supply pressure 0.7 MPa) (4)
SY5120-5DZ-C6F-Q，日本SMC电磁阀选型
的详细介绍
SY5120-5DZ-C6F-Q，日本SMC电磁阀选型
Note 2) All property values indicate maximum values.
Note 3) Supply pressure must be 0.7 MPa or less.
When the supply pressure exceeds 0.7 MPa, it may cause abnormal leakage from the pilot valve or abnormal set pressure.
Note 4) The command signal should not fall in the area A (broken line section) in Signal – Outlet Pressure Characteristics on When setting a pressure with a command signal, it must be (supply air –0.04 MPa) or less. If the pressure falls in the area A or set pressure exceeds
(supply air –0.04 MPa), the pilot valve will be ON (open). Note that if the supply pressure changes under this circumstance, the set pressure also
Note 5) Cut off the command signal when the pressure control on the outlet side is not required, such as when the line is temporarily halted, etc. Refer
Specific Product Precautions on page 736.
Note 6) To lubricate the outlet side of “VY”, use “VY” as an external pilot. Avoid lubrication to the pilot air.
Note 7) The non-lubricated specification is not applicable to these models.
Note 8) The maximum operating pressure of 0.9 MPa is available as a made-to-order specification. Refer to pages 730 to 735 for ?(Direct operated)
Ambient and fluid temperature
Maximum operating pressure
Regulating pressure range
External pilot pressure
0.7 MPa (3), (8)
0 to 50癈 (No condensation)
Set pressure +0.04 MPa to 0.7 MPa (VY201)
1 to 4 VDC, 0 to 7.5 VDC, 4 to 16 mA DC, 0 to 15 mA DC
12 VDC ?10%, 24 VDC ?10%, 0.8 W or less
DIN terminal
Cable O.D. ? to 6.5
When not operating: Zero, When operating: 7 l/min (ANR) (Supply pressure 0.7 MPa)
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
