产品[
MY1B32G-700H7-Y59A，日本SMC无杆气缸[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
MY1B32G-700H7-Y59A，日本SMC无杆气缸
产品型号:
-
产品展商:
SMC
关注指数:359
产品文档:
无相关文档
简单介绍
MY1B32G-700H7-Y59A，日本SMC无杆气缸
accelerated. The stiffening ribs, etc. should touch lightly, while staying
within the pad skirt’s deformation range. Positioning should be
MY1B32G-700H7-Y59A，日本SMC无杆气缸
的详细介绍
MY1B32G-700H7-Y59A，日本SMC无杆气缸
depending upon the operating environment.
An appropriate pad material should be selected.
Furthermore, since vacuum pads are manufactured for use with
industrial products, they should not come into direct contact with
medicines or food products, etc.
2. Depending upon the weight and shape of the
workpieces, the diameter, quantity and shape of
pads suitable for use will vary.
Use the pad lifting force table for reference.
Also, the pads to be selected will differ based upon conditions other
than the above, such as the condition of the workpiece surface
(presence or absence of oil or water), the workpiece material and its
gas permeability. Confirmation is necessary by actually performing
vacuum adsorption on the subject workpieces.
3. Use a buffer for adsorption on fragile workpieces.
The cushioning performed by the buffer is also necessary when there is
variation in the height of workpieces. When it is desired to perform
further positioning of pads and workpieces, a detent buffer can be
4. The life of the buffer will be reduced if lateral force
is applied to the buffer shaft.
Note that sometimes a load is applied to the buffer by a piping tube
(pulling or pressing, etc. in a lateral direction).
5. Do not apply an impact or large force to a pad when
This will cause deformation, cracking and wear of the pad to be
6. When transporting in an upward direction, factors
such as acceleration, wind pressure and impact
force must be considered in addition to the
Use caution particularly when lifting items such as glass plates
and circuit boards, because a large force will be applied by wind
pressure. When a workpiece which is oriented vertically is
transported horizontally, large forces are applied by acceleration
when movement is started and stopped. Further, in cases where
the pad and workpiece can slip easily, accelerations and
decelerations of horizontal movement should be kept low.
7. When transporting flat shaped workpieces that have large
surface areas using multiple pads, care must be taken in
MY1B32G-700H7-Y59A，日本SMC无杆气缸
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
