如果您对该产品感兴趣的话,可以
产品名称:
SMC真空发生器，ZH10BS-06-06
产品型号:
-
产品展商:
SMC
关注指数:503
产品文档:
无相关文档
简单介绍
SMC真空发生器，ZH10BS-06-06
同时按下q设置，把压力设定开槽螺钉E“P.SET”
（逆时针减小），观察LCD。当LCD
显示正确的数字时，停止转动“P.SET”并释放SET按钮。
设定压力被显示在压力显示面板R LCD。
（顺时针旋转增加压力）。
当管路压力下降到内规定的低允许10％
压时，液晶箭头指示（前侧）闪烁，以指示
的条件。当管路压力下降到低于既定
SMC真空发生器，ZH10BS-06-06
的详细介绍
SMC真空发生器，ZH10BS-06-06
Note 1) D-A9/A9V cannot be mounted on ø50.
Note 2) The following auto switches cannot be mounted on ø125 to ø160.
D-G39C, K39C, A3C, A44C, G5, K59, G5W, K59W, G5BAL, G59F,
G5NTL, B5, B64, B59W, P4DWL.
∗ Since the operating range is provided as a guideline including hysteresis, it
cannot be guaranteed (assuming approximately ±30% dispersion). It may vary
substantially depending on an ambient environment.
使用压力范围(MPa)
环境及流体温度
条件:水平安装，0.5MPa,电磁阀直接安装在
锁开放通口上，负载质量是允许值上限。
(ø180,ø200带磁性开关
0～60℃(带磁性开关)
0～70℃(无磁性开关) (但未冻结)
Pressure sensor and switch in one compact
body; Economical use of space; Simplified
operation; Combined functions.
Pressure switch with digital display and
self-contained solid state sensor
Minimum allowable pressure indicator on
Normally, the LCD displays line pressure.
When the SET button is pressed the set pressure
is displayed. At this time, the user is capable
of determining the difference between
the line and set pressure.
When LINE pressure is within 10% of the current
minimum allowable setting, the ARROW at the
lower left corner of the LCD flashes.
Fault alarm indicator light
When pressure drops below the current minimum
allowable, this red LED illuminates.
Simplified pressure setting
P.SET····Pressure setting trimmer
Push button: If the SET is pressed, set pressure
will be displayed digitally, enabling to set
pressure over looking at it visually.
Set pressure display
A variety of installation options
Screw included········M5,
Mounting bracket···· M5 type only
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
